| Type: | Rotating Wheel |
|---|---|
| Wheel Material: | TPR |
| Brake: | With Brake |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier CARSUN 3/4/5 inch TPR Double Wheels Medical Casters Hospital bed casters swivel casters for medical equipment and instruments
| Size | Wheel Diameter | Tread Width | Capacity Per Caster | Wheel material | Bearing | Load Height | Swivel Radius | Modle number | brake | Installation size |
| (mm) | (mm) | (kg) | (mm) | (mm) | (mm) | |||||
| 3inch | 75 | 60 | 58 | Nylon + TPR | Double Ball Bearing | 95 | 62 | D2-3P23S-307G | Without brake | Thread Stem M10*25mm M12*25mm |
| 3inch | 75 | 60 | 58 | Nylon + TPR | Double Ball Bearing | 95 | 73 | D2-3P23SB3-307G | With brake | |
| 3inch | 75 | 60 | 70 | Nylon + TPR | Double Ball Bearing | 90 | 62 | D2-3P22S-307G | Without brake | |
| 3inch | 75 | 60 | 70 | Nylon + TPR | Double Ball Bearing | 90 | 80 | D2-3P22SB3-307G | With brake | |
| 4inch | 100 | 60 | 70 | Nylon + TPR | Double Ball Bearing | 130 | 84 | D2-4P23S-307G | Without brake | |
| 4inch | 100 | 60 | 70 | Nylon + TPR | Double Ball Bearing | 130 | 92 | D2-4P23SB3-307G | With brake | |
| 4inch | 100 | 60 | 90 | Nylon + TPR | Double Ball Bearing | 124 | 80 | D2-4P22S-307G | Without brake | |
| 4inch | 100 | 60 | 90 | Nylon + TPR | Double Ball Bearing | 124 | 103 | D2-4P22SB3-307G | With brake | |
| 4inch | 100 | 60 | 70 | Nylon + TPR | Double Ball Bearing | 134 | 84 | D2-4P06S-307G | Without brake | Top Plate (70/61)*(56/50) |
| 4inch | 100 | 60 | 70 | Nylon + TPR | Double Ball Bearing | 134 | 92 | D2-4P06SB3-307G | With brake | |
| 4inch | 100 | 60 | 90 | Nylon + TPR | Double Ball Bearing | 127 | 80 | D2-4P05S-307G | Without brake | |
| 4inch | 100 | 60 | 90 | Nylon + TPR | Double Ball Bearing | 127 | 103 | D2-4P05SB3-307G | With brake | |
| Remarks:P22S indicates M10 Thread Stem;P23S indicates M12 Thread Stem;P06S indicates Top Plate;B3 means with double brake. | ||||||||||
We not only produce various standard casters commonly used in the industry, but also provide customized services according to customers' requirements.
We can produce castors that meet the EU ROHS environmental protec tion standards, and also produce medical castors that meet the international SGS medical testing standards. Since its inception, the company has established a perfect quality management system and successfully passed the ISO9001:2015 quality management system demonstration. In order to effectively ensure the product quality, the company has prepared various caster testing facilities to make it clear that the products must be tested in strict accordance with the quality management standards before leaving the factory, such as product life test, salt spray test, impact resistance test and so on.
1.Q: Are you manufacture or trading company?
A: We are manufacture. Our factory has been specializing in all kinds of caster wheels since 2014.
2.Q: Where is your factory? Can I visit ?
A: Our factory is located in Dongguan, Guangdong China. It's an hour's drive from Guangzhou Baiyun International Airport.You are warmly welcome to visit whenever you are available.
3.Q: What is your delivery time?
A: In general, within 20 days. It also depends on the order quantity.
4.Q: What is the term of payment?
A: Payment terms: 50% of deposit upon signing the PI, and balance will be cleared by T/T or L/C before delivery.
5.Q: Can I get some samples? And what's the timing?
A: Yes, samples are available at any time. We charge some sample cost and will return it during the next order.
6 .Q: How can your factory control the quality?
A: Quality is at the forefront of our commitments to our customers always. We have strict quality management process from raw
material to finished product. Details please ref below:
-- Material Vendor Assessed.
-- Incoming material inspected(IQC)
-- In-line product 100% Check(QC)
-- 100% inspect before packing(QC)
-- According to standard or customer's requirement to check random after final packing to ensure the quality(QA)
7. Q: What's the MOQ?
A:Normally we take the order no matter it's big or small. If your qty is less than 5pcs per SKU, we will arrange it in our sample room specially.
8. Q: Can I make my own brand?
A: Yes, we do both OEM and ODM, so you can make your own logo on the bags.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}